Telic Engineering represented MTU to perform a task at the Britannia platform owned and operated by Harbour Energy, offshore Aberdeen, UK. Britannia is in the North Sea approximately 210 kilometers north east of Aberdeen and is is one of the largest natural gas and condensate fields in the North Sea. […]
Telic Engineering received an assignment to represent MTU Power for the instrumentation and control tasks during an annually, or 8000 running hours, preventative maintenance service checks at the CNOOC Buzzard platform located offshore Aberdeen, Scotland. These checks are performed on one of their three, LM2500+ SAC G4 PGT25 gasturbine-generator packages on board, […]
Telic Engineering performed an assignment to represent MTU Power performing preventative maintenance and inspections. This consisted of a 4000 hour inspection of a LM2500 plus G4 Gasturbine-Generator drive package including auxiliaries such as the hydraulic starter skid. The location was at the CNOOC Buzzard platform, offshore Aberdeen, UK. The result […]
Telic Engineering received an assignment to represent MTU Power for start-up support of a GE LM5000 Gasturbine, offshore Aberdeen, UK, at the Britannia platform operated by Chrysaor. Established in 2007, Chrysaor is the UK’s leading independent North Sea oil and gas group and operates assets that provide two-thirds of the […]
Telic Engineering received prior to the Covid-19 crisis an assignment from Pro-Per Energy Services to support GE Power with commissioning activities as a control and instrumentation engineer for five TM2500 generation 8 units, consisting of LM2500+ G4 SAC gasturbines and auxiliaries. These are installed as part of the Bridge Power […]
Telic Engineering received another assignment to represent MTU Power for the instrumentation and control tasks during an annually or so called 8000 running hours preventative maintenance service checks at the CNOOC Buzzard platform located offshore Aberdeen, Scotland. These checks are performed on one of their three, GT-A, LM2500+ SAC G4 […]
Telic Engineering received an assignment to represent MTU Power for the instrumentation and control tasks during an annually or so called 8000 running hours preventative maintenance service checks at the CNOOC Buzzard platform located offshore Aberdeen, Scotland. These checks are performed on one of their three, GT-C, LM2500+ SAC G4 […]
Telic Engineering received a second assignment from Woodward Netherlands to support their client Baker Hughes, a GE company, to do control panel wire checks for one of the two turbines used for power generation on board the Alvheim FPSO operated by Aker BP located offshore Norway. Similar checks have been […]
Telic Engineering received an assignment from Woodward Netherlands to support their client Baker Hughes, a GE company, with troubleshooting concerning regular communication errors with I/O devices. This impacted the reliability of one of the two turbines used for power generation on board the Alvheim FPSO operated by Aker BP located […]
Telic Engineering Ltd received an assignment to represent MTU Power as their control and instrumentation engineer to support the start-up of a GE LM5000 gasturbine-compressor following a 4000 hour preventative maintenance service on board the ConocoPhillips Britannia platform located offshore, UK. The tasks consisted of monitoring the control system for proper sequencing, […]
