Generator


Agbami FPSO

Telic Engineering received a request from MTU Power to support their customer Chevron with an issue on board the Agbami FPSO, offshore in the Gulf of Guinea. Two out of three GE LM2500+ dual fuel gasturbine-generators on board, that are critical for supplying electrical power, failed to start on gas […]


CNOOC Buzzard Platform III

Telic Engineering received another assignment to represent MTU Power for the instrumentation and control tasks during an annually or so called 8000 running hours preventative maintenance service checks at the CNOOC Buzzard platform located offshore Aberdeen, Scotland. These checks are performed on one of their three, GT-A, LM2500+ SAC G4 […]


CNOOC Buzzard Platform II

Telic Engineering received an assignment to represent MTU Power for the instrumentation and control tasks during an annually or so called 8000 running hours preventative maintenance service checks at the CNOOC Buzzard platform located offshore Aberdeen, Scotland. These checks are performed on one of their three, GT-C, LM2500+ SAC G4 […]


Alvheim – FPSO II

Telic Engineering received a second assignment from Woodward Netherlands to support their client Baker Hughes, a GE company, to do control panel wire checks for one of the two turbines used for power generation on board the Alvheim FPSO operated by Aker BP located offshore Norway. Similar checks have been […]


Alvheim – FPSO I

Telic Engineering received an assignment from Woodward Netherlands to support their client Baker Hughes, a GE company, with troubleshooting concerning regular communication errors with I/O devices. This impacted the reliability of one of the two turbines used for power generation on board the Alvheim FPSO operated by Aker BP located […]


Millcreek – Control Upgrade

Telic Engineering Ltd was subcontracted and represented our client during an upgrade at Millcreek Power Station located in St. George, Utah, US. Specifically the hardware was upgraded from a NetCon to a MicroNet Plus control system which interfaces with the existing field devices and on-engine hardware that provide core fuel […]


Agbami – FPSO I

Telic Engineering received an assignment to convert and functional verify going from single fuel to dual fuel operation for three LM2500+ SAC gasturbine-generators on board the Agbami FPSO located offshore Nigeria. Specifically the tasks consisted of replacing single fuel nozzles with dual fuel nozzles, install primary and secondary liquid fuel […]


Spinetta Marengo

Provided services as commissioning manager during an installation and commissioning of a new GE LM2500 DLE gasturbine-generator package located at Solvay Specialty Polymers, Spinetta Marengo, Italy. The responsibilities included: Ensure environmental, health and safety (EHS) commitments are maintained. Organizing daily meetings with the site team, and the end user. Identify […]


Zappalorto – Argentina

Telic Engineering Ltd received an assignment to represent NRG Australia as the commissioning engineer for the start-up of four GE TM2500+ gen 7 units installed by APR Energy in Zappalorto, Argentina. The four units combined produce over 100 MW of electricity for the Argentinian utility grid. Specifically the responsibilities comprised […]


Glen Lyon – FPSO

Telic Engineering was contracted by our client to supply services on the newly build FPSO (Floating Production, Storage and Offloading) from BP (British Petroleum). Specific tasks were the installation and verification of hydraulic starter clutch speed probes used for hydraulic starter over-speed protection in the four LM2500 gasturbine-generators on board. […]