Telic Engineering represented MTU to perform a task at the Britannia platform owned and operated by Harbour Energy, offshore Aberdeen, UK. Britannia is in the North Sea approximately 210 kilometers north east of Aberdeen and is is one of the largest natural gas and condensate fields in the North Sea. […]
Telic Engineering received an assignment to represent our client MTU and support the start-up of a LM5000 GT following a GG exchange. This was performed offshore Aberdeen, UK, at the CNOOC Scott Platform.
Telic Engineering performed an assignment to represent MTU Power performing preventative maintenance and inspections. This consisted of a 4000 hour inspection of a LM2500 plus G4 Gasturbine-Generator drive package including auxiliaries such as the hydraulic starter skid. The location was at the CNOOC Buzzard platform, offshore Aberdeen, UK. The result […]
Telic Engineering received another assignment to represent MTU Power for the instrumentation and control tasks during an annually or so called 8000 running hours preventative maintenance service checks at the CNOOC Buzzard platform located offshore Aberdeen, Scotland. These checks are performed on one of their three, GT-A, LM2500+ SAC G4 […]
Telic Engineering received an assignment to represent MTU Power for the instrumentation and control tasks during an annually or so called 8000 running hours preventative maintenance service checks at the CNOOC Buzzard platform located offshore Aberdeen, Scotland. These checks are performed on one of their three, GT-C, LM2500+ SAC G4 […]
Telic Engineering Ltd received an assignment to represent MTU Power as their control and instrumentation engineer to support the start-up of a GE LM5000 gasturbine-compressor following a 4000 hour preventative maintenance service on board the ConocoPhillips Britannia platform located offshore, UK. The tasks consisted of monitoring the control system for proper sequencing, […]
Represented my client for a second trip to Nexen Scott as the control engineer delivering support during the 8000 hours service for the Unit A LM5000 that is used as the gasturbine-generator on the offshore Nexen Scott platform in the North Sea UK sector. This support resulted in safety and […]
Represented my client as the control engineer delivering start-up support following the exchange of a LM5000 power turbine that is used as the Unit B gasturbine-generator on the offshore Nexen Scott platform in the North Sea UK sector. This support resulted in several adjustments made in the control, identifying a number […]
Performed a third assignment representing the client for control and instrumentation support during a 8000 hour inspection and start-up of the ‘B’ gas export compressor – LM5000 Gasturbine, located at the offshore Britannia platform in the UK.
Returned to the platform for a second time to represent the client for start-up support of the ‘A’ gas export compressor – LM5000 Gasturbine, located at the offshore Britannia platform in the UK.
